INOVA E8 Air Purifier

The InovaAir AirClean E8 Air Purifier is effective in areas up to 25 square metres, suitable for bedrooms or small offices. This is compared to 100 square metres for the E20.

InovaAir go to great lengths in making quiet air purifiers. All-steel construction, the highest quality German manufactured motors, and encasing the motor in an isolated chamber with anti-vibration mounts from the body of the air purifier. This results in quiet operation and a smooth transition in airflow noise from low to high speeds and most importantly no motor hum.

Air purifiers made from plastic are prone to vibration and motor noise due to the low strength characteristics of the material. InovaAir’s specialises in superior system design and internal components operating at near-silent levels, creating only the sound of a gentle airflow when in operation.

InovaAir is proud to have been approved by the Sensitive Choice® program, developed by the National Asthma Council of Australia. The Sensitive Choice program is aimed at educating the importance of managing asthma and allergies in Australia.

The InovaAir AirClean E8 and E20 Air Purifier uses all steel handcrafted construction, including steel filter casings. With a commitment to Australian manufacturing for over 15 years, InovaAir is able provide the best air purifiers for your requirement. Australian-made not only means better quality, it also represents better value.

It is important to consider any system’s usage of power, since air purifiers can be operated up to 24/7 for extended periods. The specially manufactured fans in the E8 and E20 are designed for continuous energy efficient operation.

Dimensions: 32 x 32 x 49cm (12.6 x 12.6 x 19.3”)
Weight (Inc. Filters): 14.5kgs (32lbs)
Filter Change Intervals
Stage 1: Pre-filter: 6 months of continuous use
Stage 2: H13 HEPA Filter: 3- 5 years continuous use
Stage 3: Activated Carbon Filter: 3- 5 years continuous use
Warranty: 5 years (parts & labour), 10 years on system housing
Filter life will vary depending on: Level of dust, chemicals & odours present, and system proximity to major pollution sources.

InovaAir use powder-coated steel which is a baked finish, solvent-free, and environmentally safe. InovaAir’s highest priority is the use of materials which are both safe for you and the environment.

The filters in the InovaAir E8 & E20 systems are manufactured using H13 medical-grade HEPA filtration standards. Combined with Technostat® pre-filtration microporous filter technology, these filters exceed HEPA filtration standards. Normally only found in commercial environments such as hospitals and cleanrooms. These E8 filters provide the highest level of filtration available.

An air purification system needs to filter all the air in a room to be highly effective. Many air purifiers are designed around the constraints of the fan location and discharge air at a slow velocity in multiple directions, resulting in the re-intake of already filtered air, particularly at low speeds. Think of an air purifier like an air conditioner, which is designed to throw the air from one side of the room to the other in order to circulate conditioned air properly.

All InovaAir systems utilise a unique CleanZone design with honeycomb diffuser, which creates a straight air path from the air purifier to the other side of the room, even at lower speeds. The result is lower particle counts in the room and superior clean air circulation throughout the entire area.

All of the fans are located after the final stage filter, which means the fan always stays clean, performance is not affected by dust buildup on the fan, and most importantly, the internal workings of the air purifier do not become a dust trap which cannot be cleaned.

Support Details